Application: Universal Extractor
Category: Utilities
Description: Universal Extractor is a program designed to decompress and extract files from any type of archive or installer, such as ZIP or RAR files, self-extracting EXE files, application installers, etc.
Universal Extractor Portable 1.6.1 Development Test 6 [5.2MB / 11MB installed]
(MD5: accdb983ae395ab9674b67f3afa247a8)
Release Notes:
Development Test 6 (2015-11-07):
- Repackaged and released.
- Multilingual settings for both the Launcher and Installer have been added.
Development Test 1 (2012-09-13): Initial release
Visit the Community page
our forums
Subscribe to our email newsletter
Subscribe with RSS
Follow us on BlueSky
Follow us on Facebook
Follow us on LinkedIn
Follow us on Mastodon
Hi Dan,
I did some testing and the app came out clean - nothing left behind on Win 8.1.
If you don't mind, I have some remarks.
[FileWrite2]does not work without a[FileWrite1]in front of it (maybe that could be handled by a future release of the launcher). If you comment out the FileWrite1 section, you have to rename the second to FileWrite1 to have it parsed. (btw. the second one is the way to go)[LanguageFile]section. That way, the language is always reset to english as that is what the launcher is told to. Add something like this to solve the problem:The set language will be preserved as long as the does not use the PA.c Menu or has the automatic language switching disabled in the option
[LanguageStrings]section. Just the necessary changes will do.Display Version. It's picked up by the PA.c Installer generator for the filename too. This way anyone who finds it knows, its a beta release and not official. I'm not shure about the Dev Test numbering though...Nice work for a first try - keep it up!
Done, done, and done. Now to update the Release post and the Repository.
Dan "FloriDan" Carroll
Just an old hacker having fun.
Please visit the link again for the Development Test version that should have the issues you identified fixed.
Thank you, and rock on. Dan Carroll
Dan "FloriDan" Carroll
Just an old hacker having fun.
When you update the package but not the app inside it, you need to increment the development test number.
When you get to the point where you update the base app (whether you update the package or not) the development test number should then reset to 1.
Eg. you would have:
I believe the versioning is correct at this point. Thank you for the attention. And the info. Please give it a go and supply a critique.
Dan "FloriDan" Carroll
Just an old hacker having fun.
If you have ed this app from the link up above Before the date/time on this post, please again. The issues mentioned above are fixed and the app is identified as a Development Test.
Thank you, Dan Carroll
Dan "FloriDan" Carroll
Just an old hacker having fun.
You're on the right track.
I encountered a problem with automatic language switching, but tracked it down to a first run problem.
Language switching is done by writing the corresponding variable to the
languagekey in the UniExtract.ini. This is done by the PA.c Launcher before UniExtract.exe is called. It fails to write the language entry because at this point, no UniExtract.ini exists - it is only created by UniExtract when the enters or changes the settings.Such problems can easily by fixed by adding a DefaultData directory. It should be placed in the App directory and should contain the setting file. In this case it should look like this:
App +- AppInfo +- ... +- DefaultData +- settings +- UniExtract.ini +- UniversalExtractor +- ...The most basic contents for UniExtract.ini should do.
But you could use this to pre-define some settings if needed, maybe a special temp folder or disable an automatic update setting. I don't tkink, any of these apply to UniversalExtractor but did not look further.
When I encountered the first problems the time I started packaging apps some years ago, I found it very enlighting to watch the PA.c Launcher in debug mode. IMHO nothing beats a step by step "visualization".
-edit-
Usually, the changes are tracked in some kind of change the opening post. You can take a look at kai.inouye's post to get the idea.
I'll take a close look at the INI file. It comes complete with the app and is switched out by the Launcher to prevent loss during an update. Maybe it needs to be in the app directory until first run. A little more testing is in order.
Again thanks, Dan Carroll
Dan "FloriDan" Carroll
Just an old hacker having fun.
have a look https://www.virustotal.com/en/file/2b6d1669566565e1b450b1099320d81db56b8...
IS THIS REAL?
Looking forward to final release.
I think it would be better if you or someone else update this development,
Use this repack version, created by Gora and modified by Vandit, it is much better than the original legroom
https://www.wincert.net/forum/index.php?/files/file/43-universal-extract...
I'd prefer going after open source project like UniExtract2:
https://github.com/Bioruebe/UniExtract2
I've found three version so far
Version #1 - Universal Extractor 1.6.1.2030 Koros
Homepage: Russian Developer Forum
Latest Released Date: June 25, 2018
Version #2 - Universal Extractor 2.0 beta 4b rev1 by William Engelmann (Bioruebe)
Homepage: UniExtract2 GitHub
Latest Released Date: June 6, 2017
Note: There is already RC1 version which is on progress, as you can see in this change log
Version #3 - Universal Extractor 1.9.22.209b rev 3 (24 January, 2017)
Homepage: Wincert Forum
Note: I haven't found paf format for the latest version released on March 14, 2018
Note2: for this version, rename the file ed by adding .paf before .exe after you it with the link below
Three of them are multilingual paf and can be ed here by Jooseng
[Link to trademark-infringing website removed - mod GC]
There is Chinese community PortableApps.. I found it interesting..
--edit--
Just give me your if you want, I didn't know that it is prohibited in here.